Building a garden bench: 5 ways to make a bench with your own hands

What materials can a do-it-yourself shop be made of? As practice shows, for the manufacture of a garden bench, you can choose any building material: natural or artificial. The most common material is, of course, wood. The simplest version of the bench consists of two chocks and a board nailed to them. For many summer residents and owners of private estates, not only the functional side of the matter is important, but also the aesthetic one. After all, the shop should be pleasing to the eye, fit into the surrounding space, amaze with its unusual design. In addition to wood, other materials are also used, such as stone, metal, plastic, brick, concrete. In this case, the seat and back, as a rule, are always made of wood, thanks to the unique properties of which the comfort and safety of using the bench for its intended purpose is ensured. Each owner can build a bench for rest on his site. The main thing is to have a desire, a set of tools and building materials that are purchased on purpose or are in the bins.

Option # 1 - a pine log bench

To build a comfortable pine log bench, designed for the simultaneous rest of three adults, you need to stock up on the following tools:

  • hacksaw;
  • with an ax;
  • electric plane;
  • with an electric drill;
  • hammer;
  • circular saw;
  • screwdriver;
  • tape measure.

At the base of the bench structure lies a supporting beam made of double pine beams, which rests on a pair of legs made of the same material. The ribs are nailed to the base, the shape of which contributes to a comfortable rest. Then the back and seat frame is sheathed with bars, which, after processing, are painted with acrylic paints or varnished (there should be no resinous knots on the surface of the pine bars that go to the seat upholstery).

It may also be about how to make a wooden outdoor table for a summer residence:

A wide bench with a comfortable back: the first photo shows a general view of the product, and the second shows a close-up of the base made of a double bar

To make the base beam, saw off two beams so that the length of each of them is 1700 mm. For the legs, you will also need to saw off two pieces of 600 mm long timber. Use an ax to carve decorative chamfers in the legs. Next, set the legs to the beam and secure them with nails, as well as with staples, which you yourself make from 6 mm knitting wire.

The next step is to saw off the edges of the frame in accordance with the dimensions calculated in advance when preparing the sketch of the bench. Using a hacksaw and an ax, shape the ribs into an ergonomic shape that matches the size of the workpiece. Fasten the ribs of the seat and backrest to each other using nails (120 mm), additionally tighten them with staples. Then place the ribs on the double base block and nail in with 150mm nails. Additionally tie the parts with staples. After that, paint the frame of the bench with white acrylic paint and allow the applied coating to dry.

At the last stage of work, saw the blanks of twenty crimping bars with a circular saw, not forgetting about the allowances required for processing. In this case, the length of the bars should be 2000 mm, the width - 62 mm, and, accordingly, the height - 22 mm. Cut each workpiece with an electric plane, and then cover it with colored varnish. On the dried base of the bench, lay the prepared blocks, leaving a small distance between them for rainwater drainage. Secure each block with wood screws using a cordless screwdriver. A homemade bench, despite its massiveness, can be hardly, but nevertheless, put anywhere in the garden. This bench is also suitable for installation in a summer gazebo.

You can learn more about how to build a gazebo with your own hands from the material:

Option # 2 - a bizarre driftwood bench

To build such a shop with your own hands, you need to have artistic taste and rich imagination. Not everyone will be able to see the outlines of the future creation in the intricately curved trunks and branches of trees. Stumps appear in the form of thrones, varnished wood cuts, fixed on ornate legs, serve as a table, and some unprecedented animals frame the bench. Having installed such a bench on the territory of a country house or a summer cottage, you can be 100% sure that there is no second such specimen in nature. For the sake of such a feeling of uniqueness and originality, you can wander through the forest and look for a suitable natural material.

A unique bench made of natural material is made in a single copy by a person who can see a work of art in ordinary snags

Option # 3 - carved bench with armrests

Do you want to have such a light bench on your site, equipped with armrests and decorated with wood carvings? Then prepare several boards with a section of 40 by 180 mm and 25 by 180 mm. Check the availability of the necessary tools: electric drill, jigsaw, milling machine, screwdriver, grinder, lathe, as well as consumables: PVA glue, yacht varnish and screws.

A schematic representation of the bench, which indicates the approximate dimensions of the main parts. This bench is made using a power tool, which allows you to speed up the progress of finishing and assembly work.

Manufacturing of side trusses and support beams

Cut out the sidewall template from cardboard, according to which make four identical parts from boards with a section of 40 by 180 mm. In these parts, use the saw-thread method to drill three holes with a core drill so that each hole is 54 mm in diameter. The holes should form a trefoil located in the center of the sidewall. Using the same drill, make a hole in the bottom of the side pieces so as to partially repeat the trefoil pattern. Next, cut out half of the circle with a jigsaw, the radius of which is 50 mm. Decorate the front and rear edges of the sidewalls with semicircular notches by sawing out the corresponding holes with a jigsaw. Connect the parts of the sidewalls in pairs, gluing them together with PVA glue and additionally tightening them with two self-tapping screws (8 x 120 mm).

The stability of the bench is provided by support bars, for the manufacture of which you need to take a 40 mm thick board. The support bars are processed with a milling machine, and then with a belt sander. Perform the last operation strictly in the direction of the wood fibers. After finishing the sanding process of the sidewalls, mill their edges. Perform the exact same operation around the perimeter of the trefoil and the lower ornament.

Important! Milling is done in two steps to obtain an improved finish. First, set the cutter to a height of 6 or 8 mm. Then go through again, but already set the cutter to a height of 10 mm.

Manufacturing the rest of the bench

The seat and backrest are made of a thinner board, which is only 25 mm thick. In this case, for each element there are two boards with a length of 1250 mm. Only for the seat, two boards 180 mm wide are taken, and for the back - one board is the same, and the second one is 30 mm narrower.

Then start making the armrests and lower supports of the bench. For the armrests, do not forget to carve out a boss with a diameter of 25 mm, located on the side where the part is attached to the back. Sand and mill all parts.

Step-by-step processing of parts of a carved wooden bench: from cutting round holes in the side trusses of the product to its final assembly

Make a template for the armrests and turn two parts from it on a lathe. At their ends, also provide for the presence of bosses of the above diameter. With the help of bosses, the racks are securely attached to the seat and armrests of the bench. A joinery square, as well as a piece of electrode sharpened at both ends, helps to determine the position of the posts.

Attach the seat with screws to the side pieces and to the support rails. Drill holes for the bosses with the same diameter in the seat post and backrest. Assemble the armrests by placing the individual elements on PVA glue. Install the back of the bench and fasten it with screws. Insert a slip between the sidewalls, which will increase the rigidity of the structure. For the same purpose, under the seat on the front side of the product, attach a figured strip cut out according to the pattern. Do not forget to process the figured strip on a router and grind it.

Having finished assembling the bench, remove all the roughness with sandpaper. Then apply a protective agent to the surface of all parts of the bench. The last chord will be the operation of applying two layers of varnish. Making more elegant products must be ordered from professional craftsmen who know how to make a carved wooden bench using various techniques and technologies.

You can also build a round garden bench around a tree, read about it:

Option # 4 - stationary gabion bench

Benches built from similar materials look good next to retaining walls made of gabions or cast from concrete.

Wooden benches, masterfully built into the structure of the retaining wall made of gabions, which are metal mesh containers filled with large decorative stone

During their manufacture, one or two gabions are installed - mesh containers filled with decorative stone. Before filling, a metal frame is inserted into the gabions, to which wooden beams or solid seat boards are then screwed. By varying the height of the gabion supports, you can build benches of different heights so that it is convenient to relax not only for adults, but also for children.

How else you can use gabtons in landscape design, you can learn from the material:

But a garden bench with wrought iron elements looks good, but it is difficult to make with your own hands. Forged items are best ordered from a specialized workshop.

Option # 5 - a simple unplaned bench

Turn on your imagination and come up with more ways to make a shop with your own hands from the materials listed above. Feel free to experiment. Only objectively assess your strength. For example, it is impossible to make forged benches on their own by a person who does not know the secrets of forging. Therefore, it is better to purchase such products ready-made or order according to your sketch in specialized workshops.

  • Print

Rate the article:

(5 votes, average: 3.2 out of 5)

Share with your friends!

With your own hands - How to do it yourself

Finding a suitable corner bench in a hardware supermarket or specialty store is almost impossible. In garden furniture departments, among standard rectangular products, you rarely find a bench with a turn. Ordering it in a carpentry workshop is troublesome and expensive. Meanwhile, you can make a transforming bench with your own hands, yourself. It consists of rectangular and trapezoidal modules, which make it possible to obtain an angular, segmental and even circular product. Need a linear shop - please.

We disassemble the semicircular structure with a "tail" and arrange the modules in a row. This versatility is achieved through clever geometric relationships. Let's say the bevel angle for a given seat size should be 22.5 °. And finally, we advise you to spare no effort to ensure that all modules are made with high quality.

Start making corner-bench-transformer you can use just three modules and then increase the length and develop the shape of a universal bench.

Basic tool kit

The purchase of a ready-made shop implies a significant waste of funds. And why bother the family budget if you can make a beautiful and light bench that will become a real treasure for your yard.

List of required materials and tools:

  • profiled pipe (diameter and length depends on what size the future shop will have)
  • wooden planks
  • welding machine and electrodes
  • grinder (for cutting the pipe into the required lengths)
  • file or sandpaper
  • building level
  • roulette
  • paint for painting metal and wood parts (optional)
  • drill
  • a plane to grind boards
  • fasteners
  • a hammer
  • pliers.

[stextbox is better to make a bench that does not have a back. All that is needed for its manufacture is three rectangles of metal, which are connected by two pipes. In any case, the pipe serves as the frame of the bench, so it must be strong and reliable. [/ Stextbox]

A simple bench is quick and easy to make

Wooden bench made of broken chairs

If the farm has old wooden chairs, they can be used for making a bench.

Options for garden benches from old wooden chairs

Of 2 chairs

Having prepared two identical chairs, you can start assembling the bench:

  1. Disassemble the chairs, leaving only the part with the back that passes into the rear legs.
  2. Connect 2 backrests using a box made of bars of a suitable section.
  3. For greater reliability, at the bottom, at a distance of 20 cm from the floor, where previously there were jumpers at the chairs, make another frame with crossbeams. It can be used as a footrest or a shelf for storing small garden items.
  4. Grind the finished structure and paint it with paint for external work.
  5. Cut out a suitable seat from plywood (8-10 mm thick), cover it with foam rubber (it is convenient to use a construction stapler), and then install it on the finished frame.

Of 4 chairs

A more complex structure, which is assembled in this order:

  1. Remove seats from all 4 chairs. For 2 of them, saw off the front legs and remove the backs. Disassemble the rest of the chairs into bars. If necessary, remove old varnish or paint from the workpieces. Using a drill and pins, a screwdriver and self-tapping screws, assemble a box from the bars and attach it to two chairs that were not disassembled.
  2. Pick up boards or wooden slats that are suitable in size as a seat, and then connect them together with carpentry glue. Glue the whole seat to the base, place heavy objects on top and leave to dry.
  3. Treat the finished product with wood stain and varnish or paint.

There are many ways to make a wood bench, which you can see above. Having chosen the option you like, you can supplement it with your own ideas or modify it based on your own skills in working with wood.

Watch the video: Rustic Modern Log Bench. Welded Steel Legs. DIY Woodworking Build

Previous Article

Date palm from stone at home, reproduction, transplant

Next Article

Cutting Back Rosemary: How To Trim Rosemary Bushes